fifesjeep
Like the title states... I have a set of Black AMC LEGEND Valve Covers For sale... $150 plus shipping. If you want pics hit me up via text. 7 five 7 four 5 zero 2 nine 5 one.
Rich
amundaza
Hey Rich,
I might be interested. I don't do pics via text. Can you please email them to me at [email]amundaza@yahoo.com[/email] and I'll get back in touch with you this evening, once home from work. Thanks!
fifesjeep
Not a problem... sending the pics to your email via cell.
fifesjeep
Did you get them?
amundaza
No, they did not come thru on my [EMAIL="amundaza@yahoo.com"]amundaza@yahoo.com[/EMAIL] email address. Can you please try again. Thanks!
fifesjeep
I'm not sure why it's not working but here is a pic....
[IMG]http://i7.photobucket.com/albums/y293/Fifesamcjeep82/100_1526.jpg[/IMG]
fifesjeep
One has a little weld build-up on the inside, top... looks like somebody before me repaired a leak/hole. Possibly from a poor casting...
amundaza
Thanks for posting the pic. They look new ... are they new or used? Also, does the weld on the inside affect the cover at all? Thanks for the additional information, Rich.
fifesjeep
Not a problem... They are used. That pic was before I put them on... I cleaned, blasted, primed and painted them... now they're a little dusty but I will clean them up before whomever buys them... The weld doesn't affect anything as these covers are tall. Tomorrow I'll snap a pic of what I'm talking about... I originally was going to clamp them on the mill and remove the excess but then decided not to... Figured it wasn't hurting anything.. it was always in the back of my mind though. lol
amundaza
Thanks for the explanation and for offering to shoot pics tomorrow of the welded area. Could you also please get a shipping quote for me, as well? Fedex or UPS Ground is fine. Thanks!
amundaza
[QUOTE=amundaza;131583]Thanks for the explanation and for offering to shoot pics tomorrow of the welded area. Could you also please get a shipping quote for me, as well? Fedex or UPS Ground is fine. Thanks![/QUOTE]
BTW,
If you want to email the shipping quote, that would be fine, or just send me a private message. Thanks!
fifesjeep
Sorry, been busy... I have the pics on my phone, Can I send them to you via cell? (I'm at work)...
Call it $160 shipped (Covers my gas/box/tape/travel/etc).
Rich
amundaza
[QUOTE=fifesjeep;131588]Sorry, been busy... I have the pics on my phone, Can I send them to you via cell? (I'm at work)...
Call it $160 shipped (Covers my gas/box/tape/travel/etc).
Rich[/QUOTE]
Hey Rich,
$160 sounds good. Yes, please send the pics to my phone at 248-495-7957 If you want to PM me your email address, I can hit you up with the paypal later.
amundaza
Hey Rich,
The covers have arrived and are looking good. They're going to look nice on my 304 Stroker, once I custom powdercoat them. I'll post up pics, once they're done.
amundaza
Hi Rich,
I got the valve covers powdercoated the other night. Here's a few pics of them done. Shown in the pics, is a stock valve cover, sprayed with EN66 Metallic blue engine paint, for a color comparison (it's "close enough" for me).
Since this is a TRANSPARENT TEAL, I first put down a basecoat of extreme chrome, cured for 10 minutes, then put down the top coat of teal and cured for another 10 minutes.
Thanks again for a nice deal on these ... they're going to look great on my 304 stroker. :toothy7:
[IMG]http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3580.jpg[/IMG]
[IMG]http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3576.jpg[/IMG]
[IMG]http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3577.jpg[/IMG]
[IMG]http://i246.photobucket.com/albums/gg116/amundaza/Eastwood%20HotCoat%20System/100_3579.jpg[/IMG]
jayhawk1982
Hi Rich, do you still have your black Legend Valve covers for sale?
Thanks,
Rick
