Dusty
Fits a CJ5 or 7 1972-1986
all welded no expoxy 3 core all aluminum core and tanks down flow radiator.
centered radiator cap, made as a stock bolt in replacement 385 cubic inches of surface area across the core used one year. Did a nice job of cooling things down. Fits in the stock location and works with the stock V8 fan shroud. still in rig so pictures are a little tough. but it'll be out in about a week. only ran for one year still very clean no holes or issues. Setup with AMC V8 water necks.
$200+ the ride
currently at 95492
tufcj
I know the dimensions are similar to the AMX but the brackets are reversed. Might be interested if you could shoot me some dimensions, including bolt holes and bracket widths once it's out.
Bob
tufcj
Dusty
i dont know why i dont get notified on when a posting pops up here
you can always get my attention at ddestruel at yahoo
[URL=http://outdoors.webshots.com/photo/2599553560060221230GBPEQi][IMG]http://inlinethumb50.webshots.com/25137/2599553560060221230S500x500Q85.jpg[/IMG][/URL]
[URL=http://outdoors.webshots.com/photo/2264211170060221230YTQadc][IMG]http://inlinethumb40.webshots.com/47655/2264211170060221230S500x500Q85.jpg[/IMG][/URL]
Core: 16” Tall x 24” Wide
Overall: 22" Tall x 27" Wide
inlet 1.5” Pass / outlet 1.5” driver
2.75" Thick Tanks
retrorod
Hey there Dusty, I am interested.... how much am I looking for the ride to 98072? That is if you still have it.
Thanks
Collin
jregezeino
This still available? Interested!
jregezeino
Still interested if available?
tufcj
I bought it quite a while ago. It will find a home in my 66 Rogue project.
Bob
tufcj
