This is way-cool!

Mudrat

Technology from the 1920's for those of you that 'snowmobile' today :lo1l:

It's a silent film from back in the day ...

ironman_gq

Very cool :lo1l: I think it was on here already though

Mudrat

ironman_gq wrote
Very cool :lo1l: I think it was on here already though

Haven't had a chance to spend much time on-line or surfing the site, usually just enough to VOTE and then go back to work :oops:

Got a chance to finish rebuilding my fuel system today, and now I have fuel leaks at the fuel pressure regulator #-o More fun stuff :mrgreen:

What's the torque spec on AN-6 fittings anyway?? I might have turned to much for the O-ring fittings ... :-|

fuzz401

when the o-ring starts to come out from under the fitting it might be a tad to tight 8)

Mudrat

Umm ... sorta figured that one out there Fuzz 111!!! I don't see o-ring except in the seconday port which is plugged. I'm leaking at the primary outlet and the inlet on the fuel pressure regulator. The o-ringed fuel filter is OK. I'll pull the FPR apart and check to see if there is any scroring or cracks in the rubber, but on the FPR there is an o-ring groove machined in - which brings me back to torq spec. :-| 'Rat