Parts interchange

woodfar51

I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?

Mudrat

woodfar51 wrote
I would like to put a tilt wheel in my 1976 J10. What years Grand Cherokee has a column that will fit?

A chevy column will work. Stuck one in both the CJ and YJ - both tilt wheels!

#20 = we aren't going to make #14 by Valentines day (tomorrow)

I'm disappointed. We were doing good for a couple days :smile:

GO VOTE!!!

Goose

any of the mid 80's FSjs should bolt right in.. they didnt change much on the SJ's .. I used an 83 wag donor for mine..

woodfar51

Thanks for the info. Am going on the Pull a Part web site to find what FSJs are on their lot.

mrtazwrench

you'll need to look for 85 and older, 86 the dash changed, that coloumn has the headlamp dimmer and wiper switch in the turn signal switch.

woodfar51

Seems that anything I might need for my big 10 will need to come from 85 and older. This will make trips to pull a part much easier. Thanks for the help. PS. Would like to hook up with someone in my area,with same type truck, to share info on found local Jeep treasures.

86cj7

what about the electrical connections on the column ? i have a 74 waggie and a tilt column from a 82 g-wag is this also a plug and play ?

Mudrat

86cj7 wrote
what about the electrical connections on the column ? i have a 74 waggie and a tilt column from a 82 g-wag is this also a plug and play ?

It is if you cut them off and use waterproof connectors like I did :mrgreen:

ironman_gq

anything can be made plug and play if you have the wiring diagrams and know how to solder :t:

86cj7

where would one find a wiring diagram for a 74 and a 82 waggie ?

ironman_gq

chiltons or hayes service manuals usually have em for several model years. Just go to your local parts place or even the bookstores might have em. For about 10-20 bucks they are one of the best invesments you can make for projects like these