mad max
76 401 std bore, partially disassembled,has broken piston in #5 hole, no visible cylinder damage, was running before tear down. 850.00
amc 20 detroit locker , 300.00
amc 20 lock right, new but installed in center section, 200.00
456 gears, used good condition, 85.00
offy 360 single 4 intake, modified center holes, 120.00
turbo 400, used 150.00
shipping not included,prefer pick up on engine.
located in grain valley, mo.
[email]ssamx39@swbell.net[/email]
816 847 2336
thanx rick
mike4089
will the 4.56 gears go into an amc 20 wide track...if so ill take them..........
fifesjeep
How much would the TH400 cost to have it shipped to Norfolk Va, 23503?
mad max
they should fit with no problem unless you have a really high geared carrier(270 or higher)
e mail me your info.
last trans i shipped out to md cost 170.00 for shipping plus the materials to crate it.
thanx rick
fifesjeep
What's the total cost for the tranny and shipping etc?...
Also, what's the condition of the tranny?...
Do you have a pay-pal account etc?
mad max
the trans was working, i have only had the jeep a short time, i bought it for the engine mainly.didnt really drive it.
it had nice red fluid with no smell of burnt clutches or bands.
i can pull the pan and inspect it to see if it has any excessive materials in there if you want.
i will weigh it and get a exact quote.
i do have a paypal account.
i may be going to columbus ohio the end of may for a drag race if you want to pick it up there instead of shipping.
thanx rick
fifesjeep
Yeah if you could get a quote that would kick ass.... Do you know what year the tranny is and is it the Jeep Th400 or is it a Chevy etc with the adapter etc?
mad max
trans is 1976, jeep th400 amc case.
fifesjeep
Awesome... :lo1l: Now all that I need is that qoute and your paypal info... (My ole' lady hates the Jeep but once she's able to drive it from time to time she'll love it). 8) Do you have the torque converter, flywheel etc or is that going with the motor.
mad max
torque converter comes with it. looks fairly new rebuilt, trans also has replacement style modulator. i usually change theses when i re build them also. if i was to guess i would say it has been rebuilt.
what engine do you need flexplate for?
fifesjeep
I have the 360...
mad max
shipping quote was 223.00
i assumed it went to a residence, to a business is probably a little cheaper.i also had the include some insurance just in case.
i should have a used 360 flexplate i can include. i may need to ship it and the converter seperate, but i may be able to crate them in.
let me know if you still want it.
thanx rick
fifesjeep
$373 shipped to my house? PM me and I'll give you the address to see if the shipping changes...????
bor
I do not know if this a dead thread or not, but where is grain valley???? I am in St. Louis and looking for a 401 to build.
