Lifted79CJ7
Well I need to finish cleaning out my garage and here is what I have left:
*401 - Disassembled block, heads, crank, edelbrock performer cam, misc parts
*115 amp custom made alternator for AMC V8
*Edelbrock performer intake and 600cfm carb w/ off road kit, 14" dropped airfilter - 20 minutes use
*Slightly used radiator (about one years use with a 304)
*TF727 - condition unknown
*B&M Mega shifter - used in my CJ for the TF727
*Lokar kickdown cable AMC V8 to TF727
*CJ7 Hard doors - red with lightly tinted windows
*2 Flowmasters - 2.5 inlet centered in and out - surface rust and used
*CJ exhaust manifolds AMC V8
*Scout 44's setup for spring over, caster added (comes with "wagon" style wheels wheels)
*CJ7 Gas tank/sending unit - couple years old, stock style, comes with factory skid, used for about 2 years
*New CJ hood
*Used CJ hood
*33" BFG Mudterrain - old style - brand new on 15X10 wheel w 5on5.5 bolt pattern
Lots of other items that I know I'm forgetting - email me if you are looking for something...
Jack
[email]lifted79CJ7@aol.com[/email]
Lifted79CJ7
Also have stock CJ seat frames with worn out low back seats as well as a BestTop Sunrider soft top for a CJ7 for sale.
Lifted79CJ7
I can't believe no one isn't lookong for something!
fuzz401
what are you asking for the block and what bore is it ?
jeepsr4ever
Prices man.........prices
MoPedal
Hellooooo...Jack...Anybody out there...???????? :?:
Patf10
how much for the intake or the intake and carb combo
Lifted79CJ7
My bad!! Here ya go.... I am willing to seperate for the right price - make an offer : [email]lifted79cj7@aol.com[/email]
Just let me know what you are interested in!
1978 AMC 401 - $500.00
Disassembled and ready for machining and rebuild
Block has had the inside pressure washed out
Includes the following parts:
*Block
*Crank
*Rods
*Pistons (need to be replaced)
*Heads (no valves or springs)
*Edelbrock Performer (all only 20 minutes use):
***Performer Intake
***600 CFM Carb
***14" Airfilter
***Cam/Lifters
***Timing Chain
*New push rods
*All original engine bolts
*Water pump (used - should be replaced)
*Accessory Brackets and Bolts
I also have a:
*Bulltear oil filter relocation kit for $75 still new in the box.
*115 Amp high output alternator - $75 (Paid over $250 new)
*CJ Style exhaust manifolds - $35
*Flowmasters - $50 for both (2.5" inlet and outlet centered)
*Radiator - $50
Things I have already sold but you will need to replace:
Timing chain cover and gears
Valves
Valve springs
Distributor and wiring
Distributor gear and cam gear
Hood $75.00
Hood $10.00
Seat Frames - $50.00
Tire/Rim - $100
Dana 44's - Scout II - $450 - Same for what I paid for them, except I put a lot of work into them. :)
*Spring over
*5 degrees caster added
*Slightly used new front discs and calipers - used for ~3000 miles on my CJ on the stock dana 30, swapped them to the 44.
*3.08 gears - Bears and seals have seen better days
*Rear is lincoln locked
*Rear drum brakes - have new hard lines installed and brake cylinders still in bags
*I would reweld the rear perches - ran out of flux core and mig welded on gas - welder wasn't big enough to penetrate correctly - easy 30 minute fix.
Soft top - $125
Black Sunrider - couple brackets are bent but can be fixed easily.
Hard doors - $120
Red - older style (not paddle style)
Red paint, black interior trim, tinted windows
Steel Gastank/pickup tube/hoses ~3 years old/1977 skid - $80
CJ Brackets - $50
CJ brackets are the kind that allow the passenger to flip forward, but the drivers does not. The drivers does slide forwards and back on a track though. Remind me tomorrow and I'll take some pics for ya!
Lokar kickdown cable - $20
B&M Shifter - $50
Comes with Bulltear shifter handle that says 401 CJ7
TF727 - Condition unknown, selling for price paid - $50
tarior
Do you still have the original shifter handle for the B&M shifter, if so, I'll take it. Right away. I might like the Flowmasters as well.
fuzz401
what about just this
Disassembled and ready for machining and rebuild
Block has had the inside pressure washed out
Includes the following parts:
*Block
*Crank
*Rods
*Pistons (need to be replaced)
*All original engine bolts
*Accessory Brackets and Bolts
Lifted79CJ7
Tarior, I might have itbut beatsthesnot outofme where it is. Last time I saw it was 3 moves ago. :(
Fuzz, I am willing to seperate but for not much cheaper for the fact that I hate shipping stuff like this b/c I have a honda civic to transport it and for the fact that I paid $500 for the stock engine and all I did was tear it apart and throw away the blown alternator, scrap timing cover, abused carb, 400 pound intake, then I cleaned it and put a bunch of new parts on it. Then she all came apart, so I am offering a really good deal by my standards. I will sell the above parts that you inquired about for $400 plus shipping.
[email]lifted79cj7@aol.com[/email]
Jack
Wish I could offer a better deal, but the only reason I am selling this stuff is to pay off that stupid DUI I got back in february. :oops:
tarior
Lifted79CJ7 wroteTarior, I might have itbut beatsthesnot outofme where it is. Last time I saw it was 3 moves ago. 🙁
The handle, or the whole shifter? Either way, when you find it, I'll take the shifter. In fact, I could use said shifter fairly soon. Give me a shipping price for it and the Flowmasters together. My zip is 98626, Fedex is usually cheapest.
scout79
Are the exhaust manifolds cast or headers? If cast, how much to ship to 76240 by whatever is cheapest?
dtaylor73
Did you sell the 401? I'm interested.
TappedNDied
I'd be interested in the intake if it's available and maybe the gas tank. i'm in birmingham
mkozlows
Do you still have the 401, I am very interested if you have not had anyone claim it yet.
Mudrat
Jack - answer the posts and your PM's (mine included)
