D44 flat top knuckles

ROBERT11

Looking for a set of flat top Dana 44 knuckles, anyone ...Bueller, Bueller? I am going to convert to crossover on the Blazer. :shock:

youdidwhat

I have a buddy that is selling these three for $175.00 plus shipping from Lenexa Ks..
If you are intrested let me know I will get you two talking.

1 front has flat top knuckles and tie rod. All are passenger side drop. Rear axle missing drum. They have been sitting outside so they may need rebuild.
Located in Lenexa and are on my 4x6 utility trailer.

http://i33.photobucket.com/albums/d99/jagular7/Sale/100_1465.jpg
http://i33.photobucket.com/albums/d99/jagular7/Sale/100_1464.jpg
http://i33.photobucket.com/albums/d99/jagular7/Sale/100_1463.jpg
http://i33.photobucket.com/albums/d99/jagular7/Sale/100_1462.jpg
http://i33.photobucket.com/albums/d99/jagular7/Sale/100_1461.jpg

tufcj

I picked up a set at a boneyard for $25 each. They were used on Chevy and Jeep vehicles in the late 70s. The Chevy's were even drilled on the drivers side. Pretty easy to remove if you plan on new ball joints anyway. Just remove the 2 nuts and whack the top bolt with a BFH. :wink: Bob tufcj

youdidwhat

ya, going to your local pick and pull, would be much less. but if your town is like KC the local junk yards are barron of good 4x4 parts.