Intercooled 401 for hankrod

jeepsr4ever

Here's your pic :wink:

JeepsAndGuns

sweet, I saw that pic on IFSJA yesterday. Thats a pretty sweet setup. What turbo is that, what did it come off of?

Bendaman

That is COOL :lo1l:

Lifted79CJ7

OK, now you can't just tease us with a pic and not get details!! We need part ID's!! Jack (Still want to do that myself and green with envy)

78304CJ-7

Pardon me while I go clean my shorts :!: -RJ

Lifted79CJ7

http://www.ifsja.org/ubb/ultimatebb.php?ubb=get_topic;f=2;t=034574#000000

For anyone else who is interested:

"Turbonetics T72 big shaft with 1.0 P trim tubine- 1400.00
turbonetics racegate-325.00
2 intercoolers, Ebay-440.00
9 3"180 degree ubends-200.00
flowmaster..custom job,steel and other exhaust pipes,coupleings,clamps,paint,and hardware about- 600.00
TCI bonnet, Ebay-160.00
EFI, heads,valvecovers, manifold, grank trigger, MSD dizzy-about 7000.00
milodon oil pan and dual pickup-480.00
remote oil filters,trans and engine coolers-400.00
plus a 401 shortblock and 300 hours,,,and counting of work... tell me is it worth it?
checking my sanity. Hankrod

Goose

Oh it's worth it.. (It's always worth it) when you open the hood and the posers crap thier stylish silk boxers it's worth it. But what is it goin in?.. Javelin amx or maybe better yet very light Gremlin...

Mudrat

Heh .. heh ... heh ... a sleeper XJ or MJ :t: :t:

Trailbst

Ok, I'll post my ignorance! 8) Why two intercoolers? Is one not enough for a V-8? Very cool though!! :lo1l: I say, put it in a short wheelbase CJ, and put a wheelie bar on it. :!: Erik

Mudrat

Trailbst wrote
Why two intercoolers? Is one not enough for a V-8?
Erik

Just in case your upside down :lo1l:

Lifted79CJ7

He's dropping it in a stock looking grand waggy... =D> They'll never see it coming!

pyagid

Trailbst wrote
Ok, I'll post my ignorance! 8)

Why two intercoolers? Is one not enough for a V-8?

Very cool though!! :lo1l: I say, put it in a short wheelbase CJ, and put a wheelie bar on it. :!:

Erik

He could have probably gotten away with 1 larger one, But due to the size of those, and from what i hear he is putting ina stock looking grand waggy, probably not wanting to cut it up at al, the 2 would be easier to fit

-Paul

Henry Lavrenz

Holeshot

I see he made the mistake of buying UAP valve covers, too. Did ya notice that they weren't bolted on? That's probably because they won't work with roller rockers. Nice to look at, though.

Henry Lavrenz

Holeshot

The pics I saw had no bolts in 'em. I know because I made the mistake of buying a pair of those piece-o-crap covers. No way to put them on over roller rockers, hence useless. You don't happen to work for UAP, do ya?

Henry Lavrenz

What kind of roller rockers are you talking about? I have run CC rollers under stock AMC valve covers. The covers shown I bought from South Texas AMC - AJ Jacobs with the SR heads and they infact come from Indy. Who makes them, I could care less. I am sure we are not talking about the same products. And no I do not work for UAP - whoever that is, I have owned my own Electrical Communications business for over 20 years. Thank you for your interest and kind words, Hankrod

radamx

I too am running the Indy Valve covers and other then not haveing a place for the dipstick holder they are great..