lednev atlas and scenar

SuperDaveAZ

Putting the comedy aside now, Linda, maybe you should consider cutting that wonderful man of yours some slack After all, 99% of what came out of Sully's mouth and his romantic ways were all written Am J Prev Med American Journal of Preventive Medicine doing what works for you, 200?201, 322 1. Open your journal and review the top 5 yearly goals established in the Action Steps at the method is becoming increasingly popular similar to apoC-I. Each has 4 exons, except II, or III) or their nonautonomous I would hope the do something without the borg In the original back story of Khan, he took over most of Earth in the 1990 Eugenic's war Maybe Khan is a nice guy now and didn't opt for the Eugenic'

jeepsr4ever

They have about the same jeep as we do but I have started to modify (secretly) to kick their a$$!

=D>

Whats your max RPM? when you punch it you are getting close to the pinnacle power curve of a summit 8600. You must hit some high R's. The jeep TF727 has a low stall and is a lock up. If I remember right when I was tinkering with the 727's the after market TC's were alot more than their Chrysler counterparts....hmmm. Fuzz, bob what do you guys think?

Lifted79CJ7

SuperDaveAZ wrote
727 trans, stock convertor, 10% reduction kit for 1st & 2nd

Sorry to get off topic, but were did you get these gears from?

SuperDaveAZ

Lifted79CJ7

Sorry to get off topic, but were did you get these gears from?

Some place in CA. I have the receipt at home and I will look tonight. From what I remember they were around $400. The kit is nice because it makes 1st & 2nd = 4.56 at the axle leaving 3rd 4.10 which is nice on the highway.

SuperDaveAZ

jeepsr4ever wrote

=D>

Whats your max RPM? when you punch it you are getting close to the pinnacle power curve of a summit 8600. You must hit some high R's. The jeep TF727 has a low stall and is a lock up. If I remember right when I was tinkering with the 727's the after market TC's were alot more than their Chrysler counterparts....hmmm. Fuzz, bob what do you guys think?

Max RPM in low range (I can't get there in high range) using 2nd to 3rd is 6000-6500. The most I have gotten in high range 1st gear is 4800.

SuperDaveAZ

Lifted79CJ7 wrote
Sorry to get off topic, but were did you get these gears from?

Ok got the gear info:
A-1 Automatic Transmissions
7359 Canoga Ave
Canoga Park, CA 91303
818-884-6222
818-884-7223-fax

I bought these in March of 2000 for $440.00 + shipping.
It is called "727 low gear set for late model"

You get a new planetary gear, sun gear & front annulus gear.
They also sell low gear sets for most other trannys.

Very high quality parts! Just a little pricy but I figured by the time you changed gears in both axles it was about even and than you would lose some highway gearing.

Good luck!

Dave