jeepmonster
The time has come for 343 and 360's to shine! Scat H beam rods are here!! Check out this info from Nick Alfano taken from the www.amxfiles.com! High performanc engine parts for AMC that are CHEAPER :? than Chevy!!! Life is GOOD! =D>
"they are $399.00/set. I know this
is
about $100 more than I projected they would be back in the spring but
there is easily $300-400 more value in these rods than what was
described
with the I-beam rod. The machining and bushings for the floaters
costs
about $200 to do, a H-beam rod verses an I-beam is normally $200
more, the
polishing would cost another $100-150. The cheapest comparable rod
Summit
sells is for a Chevy small block made by Eagle and costs $495. The
same
Summit brand rod costs $499.00 for a SBC and Manley is about $600.
So now
we can start to brag about building stronger and more powerful AMC
engines
for less money than a dime a dozen Chevy. Hopefully these go well.
Next
could be 390/401 rods and possibly new forged cranks. What is this
world
coming to. The SFI flex plates and balancers should be ready soon as
well."
Hope this helps
Nick Alfano
