What are the specs on the 360?

jeepmonster

Looks like a stout motor!! Any horsepower #'s on that puppy!?? Cam specs? Pistons, compression...it's NICE. :!: =D>

MC

Well we are talking to the scat distributor in the USA about the forged rods and still havent decided on pistons. That pic is of a uncomplete block We are hoping for Forged pistons Forged rods and the possibility of a stroked crank....but with any stroked crank you really should be breaking it in on the dyno.

rollen dean montoya

all i want to do is a 4 wheel smokey burnout with the eagle :mrgreen: that should break it in good :mrgreen: :mrgreen:

jeepmonster

Funny that it's just a mock up , but soundsl like you have a plan! Any chance that this could lead to new stroker cranks being put out? How about a hydraulic roller in that bad boy!

MC

I like your thinking :t:

Mudrat

Am I going to have to step up the U-joints in my CJ when I install this thing??? 1350's 1410's ... 1510's :shock: :t: Just wanna know If I'll be able to pull wheelies with 4.56's in my D-44's :shock: :? :? :lo1l: Mudrat

pyagid

Mudrat wrote
Am I going to have to step up the U-joints in my CJ when I install this thing??? 1350's 1410's ... 1510's :shock: :t:
Just wanna know If I'll be able to pull wheelies with 4.56's in my D-44's :shock: :? :? :lo1l:

Mudrat

I was able to pull wheelies with stock 360, only hedders. and 3.31 gears :lo1l:

Besides, I think this will be a nice motor for MY cj. should come just at the right time as well

-Paul

mrtazwrench

it will work just fine in the wag i'm going to buy that needs a new motor. :lo1l:

Mudrat

I still want a motor that BullTear supports. Trying to get 258 pars is getting HARD!!! There is a market for us 'small displacement guys' but NOBODY seems to care!! Mudrat