Jeep Heads! Post your Jeeps!

jeep.xj.4x4

I know you all must be true jeep nuts, being in the "Jeep heads" group. I know I like to hear about other peoples jeeps, as well as see pics of them. I'm sure you all feel the same, so post what jeeps you have (Year/Model) along with any details you feel necessary (specs, stories, etc.), and don't forget the pics (if you have them)! What makes you a jeep nut?

I'll go first;

My 1996 XJ

My 1988 MJ

My 1946 CJ2A

For more pics and specs, go to www.jeepxj4x4.com

I am a jeep addict, check out my XJ plate!

pyagid

Ready for rebuild

Donor Tub

CJ Motor Donor

CJ Tranny Donor (dont know y i got rid of this)

Daily Driver for about 2 months

Owned these for a total of 2 hours

Sale Pending

And there was 3 more I dont have pics of
1966 CJ-5
1979 Cherokee Chief
1986 XJ

-Paul

jeep.xj.4x4

Are those 2 CJs (yellow and red w/blue hood) the free ones from tolland? :mrgreen:

pyagid

jeep.xj.4x4 wrote
Are those 2 CJs (yellow and red w/blue hood) the free ones from tolland? :mrgreen:

I am not sure, I sold them to Captn Kaos (bob fischer) who traded them to Adam in Salisbury. I know he said he just got the motor out of the red on runnign, but also know he was parting them/selling at least 1 of them at 1 point. So they could very well be in tolland now. But I dont think they are the same ones

-Paul

jeep.xj.4x4

pyagid wrote
jeep.xj.4x4 wrote
Are those 2 CJs (yellow and red w/blue hood) the free ones from tolland? :mrgreen:

I am not sure, I sold them to Captn Kaos (bob fischer) who traded them to Adam in Salisbury. I know he said he just got the motor out of the red on runnign, but also know he was parting them/selling at least 1 of them at 1 point. So they could very well be in tolland now. But I dont think they are the same ones

-Paul

:shock: I meant the ones in this thread: http://www.ctjeep.org/index.php?name=PNphpBB2&file=viewtopic&t=2391 :shock:

pyagid

yeah i knew which you were talking about. I kind of gave you the long way of saying I dont think they are the same. With the history behind the 2 pictured above sorry :oops: -Paul

jeep.xj.4x4

Still have any free jeep stuff? Like the roll bar. :wink:

okiefsj

ive never posted but ive been lurking around for a little while heres a pic of the 79 my daily driver soon to be something else

Lifted79CJ7

Here is my current project:

And here is my old CJ.....poor fella, RIP

Jack

jeep.xj.4x4

You must have around 8" of lift on that beast! Nice! :t:

Lifted79CJ7

Yeah, I think you know you have tooo much lift when your 33X12.5 tires starts underneath your body.... #-o Jack :wink:

tufcj

The only thing different today is it has TrailReady beadlocks.

cheapjeep

Heres mine :?

TnD

Hi all glad to have found a site with some good solid AMC engine teck

Here a couple of pics of my Jeep

Also currently have the remains of my '87 YJ, 1981 J-10, and a 1965 J-2000 Thriftside with what appears to be a factory option Ramsey PTO

I had a 1982 FSJ Cherokee which donated its 360 to the green YJ

The J-2000 is going to be resurrected(I got it for free out of the woods where it had sat for fifteen years) its got papers. The plan calls for using the J-10 frame and cab as the rust is terminal in the J-2000. Then add one Dana 60 front one Dana 70 rear one 24V Cummins, a NVG 6500, and a NP205. Don't hold your breath for pics though, it will be a while until I can afford that project. It's fun to think about though.

Dusty

TnD wrote
Hi all glad to have found a site with some good solid AMC engine teck

Here a couple of pics of my Jeep

Also currently have the remains of my '87 YJ, 1981 J-10, and a 1965 J-2000 Thriftside with what appears to be a factory option Ramsey PTO

I had a 1982 FSJ Cherokee which donated its 360 to the green YJ

The J-2000 is going to be resurrected(I got it for free out of the woods where it had sat for fifteen years) its got papers. The plan calls for using the J-10 frame and cab as the rust is terminal in the J-2000. Then add one Dana 60 front one Dana 70 rear one 24V Cummins, a NVG 6500, and a NP205. Don't hold your breath for pics though, it will be a while until I can afford that project. It's fun to think about though.

That is fun to talk about since i already did it Pm me or write me ill help you through as much as i can . i did a 12v and nv5600 6 spd and np 205 347 hp T ONE TIME BEFORE i put the 370 hp injectors on.

good luck dusty

TnD

Very cool!! I'd be really interested to see some detail pics of the engine bay. I plan to reshape the firewall so I can mount t he engine far enough back to accomidate the intercooler, but having a visual reference to highlight potential pitfalls would be a great help. Dave

jeep.xj.4x4

TnD, that first pic is cool! It almost looks like a drawing! :shock:

TnD

That was an awsome day of wheeling, we were the first truck to wheel a new area that I call "The Proving Grounds" , tons of granite folds, lots of steep climbs(almost went over backward a couple of times with 104" wheelbase), lots of off-camber with scary roll potential down a couple hundred feet of rock.

Mudrat

TnD wrote
Hi all glad to have found a site with some good solid AMC engine teck

Outstanding first pic I've only flown over BC haven't had the pleasure to be there.

The flex on the second pic ... 4 link with buggy springs? I can't get it large enough or clear enough to tell (company laptop :smile: ) That is truely awsome flex!
Which motor you running n that one?

Mudrat
OBTW, my daughters 87- YJ is a Canadian made Jeep :lo1l:

TnD

It's a 3 link (upper wishbone), using 1/4e springs made up from old YJ and FSJ Cherokee springs. The motor is an AMC 360 from a Cherokee.