durbs I am going to start changing gears in TJ 30/35 but I haven't done it before. I would really like someone to give me a hand if they could. I am willing to pay but not as much as a shop charges. I have all tools (press, lift, dial indicator) and I guess I could probably do it but I am moving back out to college next week and I want to make sure it is right so I dont break down. I am most likely going to be doing this on Saturday. Starting around 7am, I am on the Iron Range in Buhl if anyone near by could help pm me Thanks, Matt
Lifted79CJ7 I would recommend grabbing one of Randy's Ring and Pinion bearing pullers. They are $$$, but will make this job go very quickly. Jack
durbs I have new carriers because i am going from 3.07->4.56 and they already have baerings on them.....would i still need that?
Lifted79CJ7 Give them a call, they will walk you through it, good company! http://www.ring-pinion.com/ Jack
Lifted79CJ7 OK, I cruised the site, check out this page: http://www.ring-pinion.com/tech/yukoninst.pdf Jack
