Yo.

djfuzzy

Hey everybody. I am new here. I have a 1983 CJ7 Renegade...pretty much stock right now but it is in the restoring process. I try to join as many forums as possible for some dumb reason...and I just stumbled upon this one today.

Here is my Jeep. Poser shots for now, waiting on some suspension replacement parts before I start taking it off road...although it is fairly capable as is.

Lifted79CJ7

Welcome aboard DJ! Man, that is a pretty clean looking CJ! LEt us know whatever questions you might have and someone will defintiely help you out! Jack

jeepsr4ever

Welcome aboard! That is a nice looking jeep ya got there :t:

djfuzzy

Thanks for the compliments and warm welcome. I never stop tinkering with that Jeep of mine, so I will almost surely have questions for you.

rollen dean montoya

welcome! :t: nice cj7 :t: you should find lots of good info here. remember this"we're here to help ya" later, rollen :lo1l:

pyagid

Welcome aboard :t: Thats a real clean looking CJ. What are you plans for it? -Paul

80 J-10

Welcome

Mudrat

Bienvenudo!! Those are TEXAS tags right!!!! I hail from the Gulf coast/SE Houston area myself. Welcome and ask away, as Dog said, we're here to help. Mudrat

djfuzzy

I am from the Northwest side of H-town, myself. In the Tomball area. The plans I have for that CJ are to finish restoring it, right now I would say it is about 85%, then I will plan on lifting it just about 3 inches with suspension components and putting some larger rubber underneath it, no more than a 33. Other than that, I have no extreme plans...yet. But I know from experience that Jeeps are addictive...we didn't sell our old Wagoneer until it finally all but died. It had about 8" of lift and a Windsor 351 underneath the hood. It was a mean ol' rig. :D Once again thanks for the welcomes...I actually need help finding a good wiring diagram if anyone can help me out. The Chilton's guide is NO help at all.

Mudrat

A wiring diagram for the CJ? What are you working on? Mudrat

djfuzzy

Long story short, I broke it. Haha. Took it offroad and the battery fell of the tray, disconnected some wires. Upon starting it the next morning I FRIED all the wires coming to and from the ignition coil. Meaning fried ignition module...blah blah. Replaced all kinds of crap - pick up coil, ignition coil, module, wires, etc. Then just yesterday I tested the friggin module again and it tested bad so I returned it, brought home another and voila! The Renegade started right up... I needed the diagram so I could rewire all the crap underneath, but I did good without it. Next project is to Herculine the inside of the tub :D

iqsr2

Welcome! :t: