conical washers?

Mudrat

MC, can you make me about a dozen of these??? I need both 3/4 and 5/8's if you can!!
http://www.bluetorchfab.com/oscomm/catalog/product_info.php?cPath=65&products_id=142

Mudrat

Mud, please move this to the product ideas area please
Edit-mudrat: - this is the product area???

jeepsr4ever

mud read your post

Mudrat

jeepsr4ever wrote
mud read your post

OK, I read it??? Still need about 10 of them in 3/4 and 4-6 in 5/8??

Mudrat

jeepsr4ever

thats a cnc lathe job, but i can hook you up with heims for cheap

Mudrat

jeepsr4ever wrote
thats a cnc lathe job, but i can hook you up with heims for cheap

Got the heims and a couple spares of each. but if you looked at the tie rod on my CJ, it only clears the spring by MAYBE a 1/4" and that's not bolted down yet. I need to pick it up just a wee bit and those conical spacers will do the trick (I think). BTF has'm in stock for 3 bucks a pop so I'll get the minimum now and spares later. I'm trying to build my parts box as I go :-) (edit - $11.22 shipping!! for 10 of these!!! :shock: Holy Crap box-man!!!!)

Now about them drive shafts???

Mudrat
WARNING: Sick Rat, need

Lifted79CJ7

Mud, I have a line on a guy who takes old waggy CV shafts, cuts them to lenght, reconditions the CV and u joint and will ship to your door for $80 for the shaft and $30 for shipping. That's $110 per driveshaft. Let me know if you are interested. Jack

Mudrat

Lifted79CJ7 wrote
Mud, I have a line on a guy who takes old waggy CV shafts, cuts them to lenght, reconditions the CV and u joint and will ship to your door for $80 for the shaft and $30 for shipping. That's $110 per driveshaft. Let me know if you are interested.
Jack

Yes - I need 3. Now that I have everything sitting on rubber I can get accurate measurements.

Mudrat