Need an AMC401ci Motor for a C104 Project

ComChewy

Hey Guy's, I'm looking for an AMC 401ci long and/or short block for my Chewy-II project, I have enough body parts and a complete frame to build another Commando using a set of Dodge Dana 60's with out board mounted 3 inch leaf springs on a strapped and plated C104 frame. I'll also need the flex plate and vibration damper for the 401 motor, I'll be using a Spicer 20 T-case, AMC Turbo 400 transmission, and Holley Pro-injection 900CFM unit which I already have.

Later

Mark......

---> <---

¬?,??¬§¬?{Com&Lil-Shiite}¬?¬§??,¬?¬?,??¬§¬?{XJ}¬?¬§??,¬?¬?,??¬§¬?{90-2DrSport}¬?¬§??,¬?¬?,??¬§¬?{M/T's&Locker's}¬?¬§??,¬?¬?,??¬§¬?{XJ}¬?¬§??,¬?

jeepsr4ever

hmmm, I dont have one right now I can part with but will in a month or so

Mudrat

Welcome back Mark, your still the King of emoticons :shock: Mudrat

Dusty

Too bad you arent on the West coast, i found 2 in jeeps complete rigs for under $400 in the last month and i have a spare virgin low miles 401 in my shop that i popped $450 for that i would probably cough up. Good Luck D

ComChewy

Hey Dusty, What kind of vehicles are the 401's in, if you could take some pictures and PM to me? Or if you could get some phone numbers and PM and/or e-mail them to me.
If they are worth while I may be interested in the whole rig, if not I know some people out there that could pull the drive line and ship them to me.

Is Santa Rosa in the Central California area?

Later

Mark......

---> ......... ......... <---

¬?,??¬§¬?{Com&Lil-Shiite}¬?¬§??,¬?¬?,??¬§¬?{XJ}¬?¬§??,¬?¬?,??¬§¬?{90-2DrSport}¬?¬§??,¬?¬?,??¬§¬?{M/T's&Locker's}¬?¬§??,¬?¬?,??¬§¬?{XJ}¬?¬§??,¬?

Dusty

"Carmen and Coby" <lugnutz@centurytel.net> Add to Address Book
To: ddestruel@yahoo.com
Subject:1975 Jeep Cherokee Quadratrac 401
Date: Wed, 31 Mar 2004 17:23:56 -0800

Hi there. All I can tell you about the motor is that it ran when it was parked quite a few years ago......Not sure how good. My brother-in-law tried to start it a few months back but the starter turned over very slow. It is missing a voltage regulator and battery so we're not sure if it runs. Engine is free that's about all I can tell you. It's never been rebuilt so I'm sure it would definitely need a rebuild or could use as a core..... I'm going to ask my husband about draining the oil to check for any particles, coolant, etc....Thanks

Carmen"

Thats an email i got back from the lady who was selling one in Lakeview Or. just north of california stateline. Email her she mayu still have it, that was a month or so ago.

The Jeep Truck that i saw was in Santa Rosa, it is now in the Windsor pick and pull wrecking yard.(the guy couldnt Sell it) but last i heard the motor was still in there two weeks ago.

Here is some info on a 390 that i heard about too.

From: "Mikel Allums" <mikeallums@sbcglobal.net> Add to Address Book
Subject: 390 engine
To: ddestruel@yahoo.com

The engine is a 390 w have no info other than 390 cast into block believe it was a high perf engine baught it out of a car to install in a boat with a 360 also has edelbrock performer manifold on it

The guy is in San Jose?, and i think this is the ebay add that went with the info: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2470685134&sspagename=STRK%3AMEWA%3AIT

Last i heard he hadnt sold it yet.

Hope this helps some.
Dusty