pyagid
still have Bells Palsy :(:
ROBERT11
Spent my allowance on a steak dinner. They didn't even ask if I wanted :downtown: with that.
mrtazwrench
bad knee sucks today! :(:
Lifted79CJ7
It's 70 out today and I didn't get a chance to work on the Jeep today!!! I ended up running around town instead. :smile:
Mudrat
Spent all day SAT running around town got NOTHING done on the Jeep(s)
Sunday got the YJ tripped down - NOTHING don on the CJ
Today it's fantastic and I'm stuck inside behind this 8) laptop
AND MY AXLES DID NOT COME IN TODAY!! 🙁: 🙁: 🙁:
Mudrat
jeepsr4ever
drove till my eyes wouldnt stay open any longer, got to the shop....TONS AND TONS of work to do..I may not sleep for another 12hrs :(:
I love it :mrgreen:
rollen dean montoya
beyond way too high gas prices in ca.!!!!!!!! :shock: :(: :smile: :!:
:fist: 0X :evilbat:
Foxtrot X-Ray
Same gripe as every day.
My sales staff is brainless.
MaxW
Found out my great gram died... by email
Mudrat
Bored to freak'n tears at work. I need a mental challenge!!
MY AXLES STILL AREN'T HERE!!!
'Rat :smile:
Mudrat
Can't get the axles outta my truck! The tree I used to use for said chore isn't here anymore - something about a hurrican in Sept :smile:
Rob!! I need some help!! Common Hulk, lend me at least one hand!!!
Mudrat :mrgreen:
fuzz401
getting to old to fast for me :smile:
CJ Shark
My salesman hasn't made a cold call in two weeks, how the hell do you fire your own brother
Mudrat
Got a call from the boss today, I have a new "job." We are doing some cable and power line work on a Navy ship that will keep me busy for the next 21 days - straight - for 12+ hours a day. I'm looking at 85-86 hrs a week for the next 3 weeks.
This'll make it hard to finish the Jeep for the April 'Fun Run' in FL :smile: :smile:
Mudrat :-|
Lifted79CJ7
I have pretty much blown my bonus check and my machine work is gonna be a lot more $$$ than I had anticipated! :smile:
Jack
jeepsr4ever
So a mechanic come to the shop today asking me if i had a 3/4 ton spindle nut and i said sure and handed it to him...he aid this aint going to work.....I followed him to where he was working on a 14 bolt rear single wheel...He had been stumped all day long ......I chuckled a hearty chuckle and grabbed a screw driver and with two hands tapped teh nut loose and peeled the drum off in under 20 seconds......Mechanic my arse...I can t get anything done around here
Mudrat
Saturday Evening post - the rain caused a power loss at 1PM in the middle of trying to set up the new gears in Robs 10-bolt (without beer!!) Anyway the outtage took down my ISP and we didn't get service back (or research setting this 8) 4.536 Aubern Locker up until about 9AM today -
98 e-mails, 45 were spam!!
The day is young -we'll see what advetures it brings!
Mudrat :mrgreen:
pyagid
Damn XJ is to low and scrapes on little obstacles :(:
Lifted79CJ7
Blew a wad of $$$ drinking last night. Dang it Redbulls and Jager are expensive!! 8)
Mudrat
3 days working off and on on Robs truck - with ONE beer! 8) is in debt up to his beer fund!!! :t:
Got his 4.56 in the rear set up, new poly bushings in the springs and just finished getting rear shocks installed - I think for the first time since he owned the truck!!!
Oh the GRIPE!!! Didn't get much-of-squat done on the Jeeps 'cause Rob and Blink'n (the other half of Wink'n) filled the shop. Pics to follow when my ISP lets me upload...I think they are still having problems from yesterday.
ALSO, found the YJ ring gear is warped which is why the starter isn't engaging all the time and it makes a wierd noise when it's running -
AND I still can't get the frigg'n thing to shift between 2&4 WD :(:
Mudrat :mrgreen:
