Trailbst
Paul found a Cherokee Chief for us to part out.
Axles for me.
Engine and springs for Paul.
Anyone want a FSJ Auto tranny and Quadratrac transfercase? PM one of us.
Erik
rollen dean montoya
finally got rain today :mrgreen: =D> :lo1l: :?
rollen dean montoya
the eagle will fly saturday :? :? :? :? it's sand time again!!!!!!!!!!!
rollen dean montoya
the eagle is back in action!!!!!!!the test at stoddard ohv area went without a hitch!
Lifted79CJ7
Went to see my Volunteers play this weekend and kick some Gator butt (barely!)!! It was a bast but vacations almost over..... :smile:
Jack
rollen dean montoya
getting samantha(girlfriend),cassandra(daughter#1) and dakota(daughter#2) dressed up for a day of gunfighting at pioneertown. yes
i died most valiantly or fierociously which ever you prefer.
rollen dean montoya
got the eagle all muddy on saturday! still haven't washed it!!!!!!!!!
Mudrat
Outstanding weather!!! (mid 60's on Sat and mid 70's today)
Got to sleep late, get a little .. um .. time :? with the wife since the kids were gone and work on the YJ!! The CJ is still in formation :oops:
Mudrat
rollen dean montoya
cassandra getting a perfect score for her rotc uniform! =D> :mrgreen: :? it must be cause i helped out :-|
Mudrat
Nottadangthingtoday ....
mudrat
Mudrat
Well, since it was VETERANS day - and I still had to go to work - - - - traffic was pretty light and I made good time to and from work
Mudrat
rollen dean montoya
went to riverside national cemetery to pay my respects to my great uncle
johnny greenman(ww2) and uncle daniel montoya(vietnam marine).
good journey uncles , good journeys
mrtazwrench
boss was away from the shop until 3, only way it could have been better is if it would have been all day. :lo1l:
tufcj
Went to the pawn shop near work today. I needed a cheap 3/8" box end wrench to grind down for a project. I'm not grinding a good Craftsman or Snap-On wrench. I start digging thru their loose wrench bin and I find a couple of AC/Delco wrenches, then start looking close. I found the full set, SAE sizes 3/8" - 1" and metric 10mm-18mm, all AC/Delco (still made in Taiwan). I throw them on the counter and ask how much.
I got them all for $5 (about 20 wrenches), a great set to leave in the Jeep. And I still got another cheap Taiwan 3/8" wrench to grind down. :t:
Bob
tufcj
mrtazwrench
my parrents took me the wife and kids out for supper. :t:
Mudrat
I woke up and fogged the mirror - -it was down hill from there.
Mudrat
rollen dean montoya
we got 1 foot of snow in apple valley :mrgreen: :lo1l: :razz: :? =D> :mrgreen: :lo1l:
Mudrat
Home and sleeping in a warm bed!!! A week hunting, freezing my nuggets off in the wet and cold, but almost 100 pounds of meet in the freezer.
Mudrat
