full size jeeps

mrtazwrench

i've listed all my fsj stuff on ifsja. i'll try to link it.

http://www.ifsja.net/

mrtazwrench

the link just takes you to ifsja home page, my stuff is listed as 5 fsj whole or parts.

Tigger

mrtazwrench parts for sale link

There you go!

mrtazwrench

and it works cool! i'll learn to do that someday lol

pghjeeper

Looking for a front D44 spindle small bearing size from a pre-1977 J-10,Waggy, or Cherokee. Got any, must be in very good shape.

mrtazwrench

i have one, but it's already spoken for by the former owner, sorry, i'll keep a look out for one, i sold a pair of axles from a 74 chero a while ago and i don't think they got used he may sell or part out. i'll try to find out.

mrtazwrench

74 AXLES GONE, DISC BRAKE SET-UP RIGHT? MAY HAVE ONE LOCATED, OFF A 76 WAG. NEED TO KNOW WHICH BRAKES SO I CAN MAKE SURE IT'S RIGHT.

Mudrat

mrtazwrench wrote
74 AXLES GONE, DISC BRAKE SET-UP RIGHT? MAY HAVE ONE LOCATED, OFF A 76 WAG. NEED TO KNOW WHICH BRAKES SO I CAN MAKE SURE IT'S RIGHT.

How about a wiring harness inside and back for an 87 Wranlger?
Fried mine and don't have the time to try and pin push all the wires and rebuild the fuze block.

Mudrat

mrtazwrench

ALL I HAVE IS FULL SIZE JEEP PARTS, J-TRUCK, CHERO, WAG ETC. BUT I'LL SEE IF I CAN FIND SOMETHING FOR YOU.

mrtazwrench

I FOUND A DASH HARNESS I DON'T KNOW IF THAT WOULD HAVE WHAT YOU NEED.

Mudrat

mrtazwrench wrote
I FOUND A DASH HARNESS I DON'T KNOW IF THAT WOULD HAVE WHAT YOU NEED.

Does it have a fuse block like this with the harness still attached? Without the hole? :lol:

Thanks

mudrat

mrtazwrench

I'LL DO SOME CHECKING,THE HARNESS IS FOR A 4.2 5SP W/O A/C, IT MAY TAKE ME A FEW DAYS TO GET BACK TO YOU.

Mudrat

mrtazwrench wrote
I'LL DO SOME CHECKING, IT MAY TAKE ME A FEW DAYS TO GET BACK TO YOU.

Thanks, you see the problem, the Paul Harvey version is that when that fuse blew, it took out the wires and terminals for the wipers, washer and I don't know what else. The reason for the whole harness is to correct the problem that caused the blow-out.

Thanks again

Mudrat

mrtazwrench

IT'S FOR A 4.2 5SP W/O A/C, LET ME KNOW IF THAT WON'T WORK.

Mudrat

mrtazwrench wrote
IT'S FOR A 4.2 5SP W/O A/C, LET ME KNOW IF THAT WON'T WORK.

It should, I have a 4.2 Auto W/O AC Is it a whole harness or just the fuse block? And of course what do you need in trade? How many Washingtons or ... :?: :?:

Thanks

Mudrat

mrtazwrench

IT'S A HARNESS, I JUST WANT TO MAKE SURE THE FUSE BLOCK IS OK THEN I CAN GIVE YOU SOME IDEA HOW MUCH FOR IT, MAY TAKE A FEW DAYS BUT I'LL GET BACK TO YOU.

Mudrat

mrtazwrench wrote
IT'S A HARNESS, I JUST WANT TO MAKE SURE THE FUSE BLOCK IS OK THEN I CAN GIVE YOU SOME IDEA HOW MUCH FOR IT, MAY TAKE A FEW DAYS BUT I'LL GET BACK TO YOU.

That's great!! If it resembles this, send me a number :!:

A larger pics is at:
http://members.cox.net/mudrat/87%20YJ/100_0704.JPG

THANKS!!!

Mudrat

mrtazwrench

I HAVEN'T FORGOT ABOUT YOU, IT'S JUST A CRAZY WEEK WITH TURKEY DAY AND EVERYTHING SO I'LL LET YOU KNOW AS SOON AS I CAN.

Mudrat

mrtazwrench wrote
I HAVEN'T FORGOT ABOUT YOU, IT'S JUST A CRAZY WEEK WITH TURKEY DAY AND EVERYTHING SO I'LL LET YOU KNOW AS SOON AS I CAN.

Rog-O, I'll be survying damage in San Diego until Dec 5 so take your time. Thanks - Painless has a fuse block for just over $100 I don't know if it will mate to the existing engine side though?

Mudrat

mrtazwrench

I FINALLY FOUND A HARNESS IT'S FOR A 4.2 AUTO, BUT I'M GOING TO HAVE ABOUT $190 IN IT AND I DON'T KNOW WHAT THESE WEIGH BUT I THINK IT WOULD BE $15-$20 TO SHIP SO YOU COULD DO A LOT OF WIRING WITH THAT $100 FUSE BLOCK DEPENDING ON WHAT YOUR TIME IS WORTH.