An actual TECH section. Your write ups on "how-to-do" this and that within the forum is ok, but it is also confusing. Have a section that is specific to write ups on "How-to-do's" outside the forum. As you know there are more then one way to skin a cat. For example your Axle shortning process. You have a rather "unique" or might I say less common way of doing it. You blow the welds out at the pumpkin and cut the tube on the opisite side from what I have ever seen done before. Both work , but do a FULL write up about explaining how you went about it, steps that people can follow. Not just, take this off, cut this, reweld this. This, in itself will attract the DIY'ers and those are the members you are looking for. They will have questions and they will have answers for topics. THIS is what the forum is for. Discussion about mods and tips on how to make an AMC oiling system better are all things that people getting into Jeeps will want to know how to do, give them a place where that can do some "one stop shopping" next thing you know everone is linking http://www.bulltear.com to there messages saying "Go here for a good write up and forum on how to do this" .
MC you know how to do alot, and you are a skilled machinest, if you sit down and write about the process you go through to mod and axle, or an easy CJ brake upgrade, etc, these are the things that will bring people to your site and hopefully buy some of your products, and well if they don't they can at least learn something in the process and spread the word. Hey that MC guy makes some KICK ASS D60 high stear arms (HINT HINT).
Just my .02
-RJ
